5
1) Using a ruler & pen to draw a straight line
as picture below.
6) Connect the linkage as shown and secure
the control wire with a wire keeper.
2) Locate the two nylon control horns, two
nylon control horn backplates and four ma-
chine screws.
3) Position the aileron horn on the bottom
side of aileron. The clevis attachment holes
should be positioned over the hinge line.
4) Using a 1mm drill bit and the control
horns as a guide, drill the mounting holes
through the aileron halves.
5) Mount the control horns by inserting the
screws through the control horn bases and
aileron halves, then into the mounting back-
plates. Do not overtighten the screws or the
backplates may crush the wood.
2) Secure the servos with the screws provid-
ed with your radio system.
INSTALLING THE AILERON LINKAGE.
2 x 20mm
Control horn.
Mounting Plate.
Mounting Screws.
