6
INSTALLING THE AILERON SERVO.
.
1) Install the rubber grommets and brass
collets onto the aileron servo. Test fit the ser-
vo into the aileron servo mount.
Because the size of servos differ, you may
need to adjust the size of the precut openingin
the mount. The notch in the sides of the mount
allow the servo lead to pass through.
4) Tape the servo lead to the wing to prevent
it from falling back into the wing.
5) Reinstall the servo into the servo mount
and secure the servo inplace using the wood
screws provided with you radio system.
2) Using a small weight (Weighted fuel pick-
up works well) and thread, feed the string
through the wing as indicated.
3) Attach servo lead to the aileron servo. At-
tach the string to the servo lead and carefully
thread it though the wing. Once you have
thread the lead throught the wing, remove
the string so it can use for the other servo
Electric wire.
Thread.
Plastic tape.
.
.
Servos
Small
weight.
