13
ELECTRIC POWER CONVERSION.
1) Locate the items neccessary to install the
electric power conversion included with
your model.
- Model size: .46 size models
- Motor: 35mm 830 rev per volt
- Propeller: 13x 6
- ESC: 50A
- Lipo Batteries: 4cell 4200mA
3mm
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3 x 15mm wood screws.
The propeller should not touch any part
of the spinner cone. If it does, use a sharp mod-
eling knife and carefully trim away the spinner
cone where the propeller comes in contact with
it.
