OPERATING INSTRUCTIONS
(cont’d)
C. Notes on Setting the Clock (cont’d)
Beeps during oven setting; One Beep:
Oven accepts the entry. Information has been
entered in the correct sequence. Two Beeps:
Oven does not accept the entry. Check and try
again.
2. SETTING THE OVEN TIMER
A. Timer works independent from cooking and
can be set anytime for various kitchen tasks.
Use oven timer though oven is also timing a
microwave cooking function. Set time as
follows:
- Touch the TIMER pad. Word prompts ENTER
TIMER TIME show on the display. If you are
using the TIMER while cooking, Cooking time
countdown will be temporarily replaced on the
display while timer is being set.
- Enter the amount of time you wish to set by
touching the correct number pad from one digit
(ex. 5 for 5 second) to four digits (2400 for 24
minutes). ENTER TIMER remains on the
display.
- Touch START/STOP pad. Word prompt TIMER
starts flashing and timer countdown can be
seen on display for 3 seconds before cooking
tim is returned to display. Word prompt TIMER
is displayed alone with additional word prompt
indicating current cooking mode.
B. Notes on Setting the Oven Timer.
To STOP or RESET TIMER when microwave is
not cooking, touch RESET pad.
- When setting timer DURING a cooking
operation, take care to set timer correctly. Once
the timer is set during cooking, setting cannot
be changed without resetting the cooking
function at the same time. Touching RESET will
not allow you to change timer setting while
cooking.
- When end of time is reached, one long
been can be heard and timer will leave the
display. If oven is not cooking, CLOCK and
time of day (if set) will return to the display. If
oven is in
cooking operation, one long beep can be
heard and TIMER will leave display while
oven continues cooking time countdown.
3. SETTING THE COOKING TIME &
POWER LEVELS
A. Quick & Easy
When cooking at 100% power, simply set
cooking time by touching number pads (ex. 3
minutes, touch 3-0-0) and START. 100%
power is automatically set. For 1-step cook-
ing, you do not have to touch COOK pad
before setting time.
B. To Cook at Lower Power Levels
After setting cook time, touch POWER pad
then single digit representing the power level
desired. Touch START pad. Since oven
automatically assumes 100% power, you
must switch power level (when desired) after
setting cook time.
USE THESE SINGLE DIGITS TO
REPRESENT POWER LEVELS:
Digit
% of Power
9
90%
8
80%
7
70%
6
60%
5
50%
4
40%
3
30%
2
20%
1
10%
8
