Dinstar UC8000 IPPBX User Manual Download

Page: 99 / 103

UC8000 IPPBX User Manual

Figure 5.8.9 Create a new extension number

Table 5.8.9 Explanation of parameters

Index

Optional, unique and non-repeatable.

Extension Number

Select the extension to enable this feature, users cannot
select the SIP extension with the SCA enabled and the SIP
extension as secretary.

Ring Strategy

Support simultaneous and sequence(ascending).
simultaneous is all numbers ring together, and the sequence
starts from the extension and rings from top to bottom.

Ring Time(5s~200s)

Ringing time per number.

Status

This feature is only available when enabled.

Destination List-Time

Any is unlimited; if users choose to set the time period as
shown above1-<Time>, they will only be called during this
time period.

Destination List-
Destination

Other numbers for this extension

，

you can select SIP

extension, SIP trunk Relay, fill in the extension number to be
called when selecting the relay.

•

Save the application.

•

Any number dialing the extension number such as 100, will ring based on the

Summary of Contents for UC8000 IPPBX








































































































Search results

Summary of Contents for UC8000 IPPBX

Reviews:

Related manuals for UC8000 IPPBX

Brands by name

Popular brands

Dinstar UC8000 IPPBX, User Manual

Search results

Summary of Contents for UC8000 IPPBX

Reviews:

Related manuals for UC8000 IPPBX

Brands by name

Popular brands