UC8000 IPPBX User Manual
30
and standby. When the active and standby configuration is enabled, one or more
floating IP addresses can be configured, and users can access the UC8000 based
on this IP address.
In the profile, the bound interface will also become the interface corresponding to the
floating IP address (e.g., enp6s01:1 (172.28.4.100)), and the call service data will be
forwarded to the UC8000 via this floating IP address.
Floating IP configuration steps.
•
On the Network/Floating IP interface, click New.
•
Configure a floating IP address based on the interface and interface index.
Table 5.4.1 Floating IP parameters configuration instructions
Index
Floating IP entry numbering, up to 32 floating IP addresses can be
created.
Interface
Select the interface to which the floating IP is bound, and drop
