Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.Error! Use the Home tab to apply
标题
1 to the text that you want to
appear here.
UC100-1T1S1O User Manual
Copyright©2011-2016 Dinstar
73
Outbound Proxy
If outbound proxy is used, enter the IP address or domain name of the
proxy server
Port
If outbound proxy is used, enter the listening port of the proxy server
Transport
Transport protocol: TCP or UDP
Register
If it is on, the SIP trunk will send register request to the peer device
Username
The username of this SIP trunk, it is generally a phone number
Auth Username
The username used for register authentication by this SIP trunk
Password
The password used for register authentication by this SIP trunk
From Header
Username
Choose the registered username or the true caller ID for the ‘from
header’ of the invite message when a call goes out.
Expire Seconds
The validity period after the SIP trunk is registered successfully. When
the time expires, the SIP trunk will send register request to the server.
Default value is 1800s
Retry Seconds
When the SIP trunk fails to be registered, the interval to send register
request;
Default value is 60s
Heartbeat
If heartbeat in on, heartbeat (options) messageswill be sent to examine
the connection with servers;
The default value is ‘Off’
Heartbeat Period
The interval of sending heartbeat (options) messages
SIP Profile
he SIP profile of the SIP Trunk; make reference to Profile
SIP
section
Status
If it is enabled, it means the SIP Trunk can be used; otherwise, the SIP
trunk is unavailable
Note:
If UC100-1T1S1O is regarded as a terminal and intends to register to a server, you need to
configure a SIP trunk connecting UC100-1T1S1O and the server, and then enable register for
the SIP trunk.
If the FXS f UC100-1T1S1O intends to register to a server, you need to configure a SIP trunk
connecting UC100-1T1S1O and the server, then enable register for the port and designate the
SIP trunk to it.