Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.Error! Use the Home tab to apply
标题
1 to the text that you want to
appear here.
UC100-1T1S1O User Manual
Copyright©2011-2016 Dinstar
32
5.3.9
Voice
On the
System
Voice
interface, you can upload an IVR file according to your needs. At
present, only wav audio file is allowed. The format of the uploaded wav audio file must be:
monaural, 8000hz, 16bit, and size of no more than 550KB.
Figure 5-19 Upload IVR File
5.3.10
Command Line
On the
System
Command Line
interface, some commonly-used command lines can be
directly selected in the draw-down box, and therefore user has no need to enter command
lines on Telnet. In this way, the efficiency of problem diagnostics is greatly improved.
Commonly-used command lines include fxo config, fxo status, fxs config, fxs status, gsm
status, gsm bcch, gsm oper, sip status, sip profile and so on.
Figure 5-20 Command Line
5.3.11
Diagnostics
Use a telephone line to connect the FXS port and the FXO port, and then connect the
UC100-1T1S1O to a vailable WiFi. On the
System
Diagnostics
interface, select a module
(FXS/FXO, GSM or WiFi) that you want to diagnose. Click Start, and the gateway will begin
to diagnose the selected module(s).
If the progress bar of diagnostics is green, it means the module that is diagnosed works well;
if the progress bar is red, it means the module that is diagnosed is faulty.