Operator’s Manual
Battery Charging Instructions
GTWY1200 SERIES 17
Battery and Charger
Instructions
Observe and Obey:
Do not use an external charger or booster
battery.
Charge the battery in a well-ventilated area.
Use proper AC input voltage for charging as
indicated on the charger.
Use only Dingli authorized battery and
charger.
To Charge Battery
1 Open the battery pack lid to access the
battery.
2 Remove the battery vent caps and check
the battery acid level. If necessary, add only
enough distilled water to cover the plates.
Do not overfill prior to the charge cycle.
3 Replace the battery vent caps.
4 Be sure that the DC output cord is properly
connected to the battery. Black to negative,
red to positive.
5 Connect the battery charger to a grounded
AC circuit.
6 The charger will turn off automatically when
the battery is fully charged.
7 Check the battery acid level when the
charge cycle is complete. Replenish with
distilled water to the bottom of the fill tube.
Do not overfill.
(Maintenance free battery needn’t do them all,
recharge it directly)
