Operator’s Manual
Pre-operation Inspection
GTWY1200 SERIES 8
Pre-operation Inspection
Be sure that the operator’s manuals are
complete, legible and in the storage
container located on the platform.
Be sure that all decals are legible and in
place. See Decals section.
Check for battery fluid leaks and proper
fluid level. Add distilled water if needed.
See Maintenance section. (DC models)
Check for hydraulic oil leaks and proper
oil level. Add oil if needed. See
Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts
and unauthorized modifications:
Electrical components, wiring and
electrical cables
AC & DC models: Hydraulic power unit,
hoses, fittings and cylinder
Platform entry mid-rail
Sequencing cables and pulleys
Lifting chains and idler wheels
Nuts, bolts and other fasteners
Mast
columns
Breather
cap
Outriggers, leveling jacks and footpads
Check entire machine for:
Dents or damage
Corrosion or oxidation
Cracks in welds or structural components
Inspect and clean battery terminals and all
battery cable connections (DC models)
Be sure that all structural and other critical
components are present and all
associated
