utton
Symbol in the manual
[OK]
– Set-up mode access
–
Con
fi
rmation of selected item in the menu
– Move the cursor in the line
– Saving of set-up data
Button
Symbol in the manual
[
↑
↓
]
– Move in the menu
– Change of values
Button
Symbol in the manual
[ESC]
– Cancelling of carried out changes
– Shift one level up
Teaching
mode activation
Echo receiving
Units
Display
of measured values
Set-up elements
Ultrasonic transmitter
Upper lid nut
Cable gland
Control buttons
OLED display
Label
Fig. 16: Full view of ultrasonic level meter
S
TATUS
SIGNALIZATION
display
function
"NO ECHO"
Lighting intermittently
– the level meter is not able to receive echo
for a long time. Incorrect installation of the level meter
"DEAD ZONE"
Lighting intermittently
–
the measured level is in the "dead zone" of
the level meter or the ultrasonic converter is dirty.
"NO PASSWORD"
It will appear in the item "MENU"
–
the level meter is protected
using a password against unauthorised setting. Enter the correct
password (see p. 17).
symbol "T"
1)
Lighting permanently
–
"TEACHING" mode activation.
symbol "E"
1)
Lighting intermittently
–
correct echo receiving (of the re
fl
ected
signal) from the measured surface level.
1)
symbol appears in the lower left corner of the display
S
ET
-
UP
ELEMENTS
www.jetec.com.tw
久德電子
TEL:
+886-4-23729418
FAX:
+886-4-23724011
(40349)
台中市西區福人街11號
