Dimplex Winterwarm WWFH20E Instruction Manual Download Page 3

Page: 3 / 40

When connecting this recessed appliance it is necessary that the fixed wiring

electrical supply is routed through an accesible switch in accordance with the

latest IEE wiring regulations.

If the supply cord is damaged it must be replaced by the manufacturer or service

agent or a similarly qualified person in order to avoid a hazard.

WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN

• Swallowing may lead to serious injury in as little as 2 hours or death, due to

chemical burns and potential perforation of the oesophagus.

• If you suspect your child has swallowed or inserted a battery go straight to a

hospital emergency room.

•

Examine devices and make sure the battery compartment is correctly

secured, i.e. that the battery cover is fitted securely. Do not use if the

compartment is not secure.

• Dispose of used batteries immediately and safely. Flat batteries can still be

dangerous.

Summary of Contents for Winterwarm WWFH20E









































Search results

Summary of Contents for Winterwarm WWFH20E

Reviews:

Related manuals for Winterwarm WWFH20E

Brands by name

Popular brands

Dimplex Winterwarm WWFH20E, Instruction Manual

Search results

Summary of Contents for Winterwarm WWFH20E

Reviews:

Related manuals for Winterwarm WWFH20E

Brands by name

Popular brands