background image

These functions modify the normal behaviour of the appliances operational modes. The 

advanced functions available will depend on the active operation mode, for example 

an advance function is only available when timer mode is operational and similarly a 
runback function is only available for continuous heating modes.

The ‘Advance’ Function

The 

ADV

 button forces the next timer segment to activate early, this forces a temporary 

change and will not effect the timer schedule. This allows the user the flexibility to begin 

or end a programmed heating period early, with the touch of a button.

This is useful if you are at home when you had not planned to be, or need to leave when 
you had planned to have the heating on.

If the remote displays 

OFF

, Schedule Icon or no target temperature, and heat is required, 

press the 

ADV

 button. If the remote displays ON and heat is not required, press the 

ADV

 button and the heater will stop heating until the beginning of the next ON period.

Pre-action State

Action

Impact

Heating On (Timer Mode)

Advance activated

Heating On period switched to Heating 

Off until the next scheduled ‘Comfort On’ 

period.

Heating Off (Timer Mode)

Advance activated

Heating Off switched to Heating On until 

the next scheduled ‘Heating Off’ period.

Heating On (Advance Active)

Advance deactivated

Heating On switches to Heating Off. 

Appliance will follow schedule set in the 

currently active Timer Profile

Heating Off (Advance Active)

Advance deactivated

Heating Off Switches to Heating On. 

Appliance will follow schedule set in the 

currently active Timer Profile

Advanced Mode Functions

25

Summary of Contents for Winterwarm WWFH20E









































Reviews: