Dimplex Winterwarm WWFH20E, Instruction Manual

Page: 26 / 40

Runback
The Runback mode will assign a timed period to a continuous heating mode. Once this
time period has elapsed the appliance will revert to Comfort Off mode. When runback
has been activated and the
ADV
key is pressed from a continuous heating mode then
it is possible to select between four available time durations. See Advanced Menu
instructions on page 28 for details on activating runback and setting the time periods.
Initiating Runback
• While in a continuous heat mode, press the
ADV
button to initiate the runback
function. The shortest available runback duration will appear flashing on the
screen.
• If desired the additional runback duration periods can be accessed by pressing
the
ADV
button. There will be four runback time durations available to select from.
• Continue pressing Advance until the desired runback time has been reached
• When satisfied with the selection press
ENTER
to confirm.
• Once active the set-point will change to the pre-set value that has been selected
during the runback setup. The set point can be changed at any stage using the
arrow keys.
• The display will then alternate every 2 seconds between runback time left and
current temperature set point.
Deactivating Runback
• During a runback period, use the
ADV
button to cycle through runback settings
until ‘OFF’ is flashing.
• Press
ENTER
to confirm return to home screen in the heaters previous heat
setting.
(Runback time left) (Current setpoint)
26