T
he remote control offers the facility to select the heat output from the appliance
between
HI
and
LO
heat settings,
HI
heat is set by default. This is a global heat setting
and once set all other operational modes will operate with this setting.
In order to set/change the heat setting,
• From the home screen press and hold the
ADV
button for 2 seconds. The remote
will enter the heat selection screen.
• Use the arrow keys to navigate to the desired setting and confirm using the
ENTER
key.
• The remote will return to the home screen and all heating modes will function
with the selected heat output.
NOTE:
The HI temperature setting will modulate the heat output to optimise the efficiency
of the product. As the room temperature approaches the set-point the heater will
automatically switch to the lo heat setting.
Heat Output Selection
19
Summary of Contents for Winterwarm WWFH20E
Page 7: ...500 Min 203 Side View 500 Min 368 88 120 Min 14 Min 500 Min 400 100 7 ...
Page 9: ...9 ...
Page 14: ...14 ...
Page 37: ...37 ...
