Dimplex WI 120TU, Installation And Operating Instruction

Page: 35 / 84

www.gdts.one 452237.66.53 · FD 9912 EN-15
WI 120TU - WI 180TU English
6.7 Power consumption of compressor protection
(per compressor) W
150 / thermostatically controlled
6.8 Power consumption of pumps kW up to 0.48
7 Complies with the European safety regulations
4
8 Additional model features
8.1 Water in device is protected against freezing
5
Yes
8.2 Max. operating overpressure (heat source/heat sink) bar 3.0
9 Heat output / COP
9.1 Heat output / coefficient of performance (COP)
3 6
Performance level 1 2
at W10 / W55 kW / --- 83.8 / 3.7 165.9 / 3.7
at W10 / W45 kW / --- 88.2 / 4.6 170.4 / 4.5
at W10 / W35 kW / --- 94.3 / 5.8 180.1 / 5.6
1. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation at 55 °C flow temperature.
The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
2. Note that additional space is required for pipe connections, operation and maintenance.
3. These data indicate the size and capacity of the system. For an analysis of the economic and energy efficiency of the system, the bivalence point and regulation should be
taken into consideration. These specifications can only be achieved with clean heat exchangers. Information on maintenance, commissioning and operation can be found in
the respective sections of the installation and operating instructions. The specified values, e.g. W10 / W55, have the following meaning: Heat source temperature 10 °C and
heating water flow temperature 55 °C.
4. See CE declaration of conformity
5. The heat circulating pump and the heat pump manager must always be ready for operation.
6. The coefficients of performance are valid with the circulating pumps included in the scope of supply.