Dimplex WI 100TU, Installation And Operating Instructions Manual

Page: 21 / 56

www.dimplex.de E-9
English
12
12 Device information
1 Type and order code
WI 50TU WI 100TU
2 Design
2.1 Model / controller Universal / internal Universal / internal
2.2 Thermal energy meter Integrated Integrated
2.3 Installation location / degree of protection according to EN 60 529 Indoor / IP 21 Indoor / IP 21
2.4 Water in device protected against freezing
1
1. The heat circulating pump and the heat pump controller must always be ready for operation.
Yes Yes
2.5 Performance levels 2 2
3 Operating limits
3.1 Heating water flow / return °C up to 58 ± 2 up to 58 ± 2
3.2 Cold water (heat source) °C +7 to+25 +7 to+25
4 Performance data / flow rate
4.1 Heating water flow rate with an internal pressure differential of
W10 / W35/30 m³/h / Pa
16.5 / 17700
W10 / W45/38 m³/h / Pa 11.3 / 9100
Minimum heating water flow rate W10 / W55/45 m³/h / Pa 7.5 / 4500
4.2 Cold water flow rate at an interal pressure differential of
2
W10/7 W35 m³/h / Pa
2. The given well water flow rate is identical for all operating points.
21.2 / 21700
4.3 Heat output / COP
3
3. These data indicate the size and capacity of the system according to EN 255 / EN14511. For an analysis of the economic and energy efficiency of the system, the bivalence point
and regulation should be taken into consideration. The specified values, e.g. W10/W55, have the following meaning: Heat source temperature 10 °C and heating water flow tem-
perature 55°C.
10K
5K
4 10K
5K
4
4. The temperature spread of 5K is based on the standard value of W10 / W35 in operation with 2 compressors.
at W10 / W55 kW / ---
5
5. Operation with 2 compressors.
43,3 / 3,5 86,7 / 3,3
kW / ---
6
6. Operation with 1 compressor.
22,2 / 3,6 40,2 / 3,0
at W10 / W45 kW / ---
5
45,5 / 4,5 90,9 / 4,1
kW / ---
6
23,7 / 4,6 47,6 / 4,3
at W10 / W35 kW / ---
5
49,0 / 6,1 47,3 / 5,7 98,5 / 5,6 95,5 / 5,3
kW / ---
6
26,3 / 6,3 25,1 / 5,9 52,8 / 6,1 51,7 / 5,8
4.4 Sound power level dB(A) 59 70
4.5 Sound pressure level at a distance of 1m
7
dB(A)
7. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35°C. The specified sound pressure level
represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
44 56
5 Dimensions; weight and filling quantities
5.1 Device dimensions without connections
8
H x Wx L mm
8. Please note that additional space is required for pipe connections, operation and maintenance.
1660 x 1000 x 775 1890 x 1350 x 775
5.2 Device connections for heating Inches R 1 1/2“ Int. Thread R 2“ Int. Thread
5.3 Device connections for heat source Inches R 2“ Int. Thread R 2 1/2“ Int. Thread
5.4 Weight of the transportable unit(s) incl. packaging kg 373 593
5.5 Refrigerant; total filling weight0 Type / kg R404A / 7,5 R404A / 15,8
5.6 Lubricant; total filling quantity Type / litres Polyolester (POE) / 3,8 Polyolester (POE) / 6.5
6 Electrical connection
6.1 Load voltage; Fuse protection 3~/PE 400V (50Hz) / 32AT 3~/PE 400V (50Hz) / 36AT
6.2 Control voltage; Fuse protection 1~/N/PE 230V (50Hz) / 13A 1~/N/PE 230V (50Hz) / 13A
6.3 Starting current with soft starter A 29 100
6.4 Nominal power consumption W10 / W35 / max. consumption
3
kW
8,3 / 12,8 18,0 / 28,4
6.5 Nominal current W10/W35 / cos
ϕ
A / --- 14,9 / 0,8 33,4 / 0,8
6.6 Power consumption of compressor protection
(per compressor)
W
70; thermostat controlled 70; thermostat controlled
7 Complies with the European safety regulations
9
9. See CE certificate of conformity.