Dimplex TRP 100 M, Installation And Operating Instructions Manual

Page: 21 / 50

TRP 100 M, TRP 100 W English
www.dimplex.de/en 1810/B EN-7
NOTE NOTE
ON OFF ON
ON OFF
ON OFF
 Press

or

to select the FROST symbol. The
FROST symbol flashes. Press the ENTER key.
FROST symbol and temperature 7° C are
displayed.
10.5 Runback timer
The runback timer enables the user to activate a one-
off, time-limited heating program.
 Press the MENU key. The TIMER symbol flashes.
 Press the ENTER key. The ON symbol flashes.
 Press

or

to select the OFF symbol. The OFF
symbol flashes.
 Press the ENTER key =>Heating operation off.
 Press the FORWARD key. Heating operation takes
place for 30 minutes (factory setting).
 Where necessary, change the room temperature
with

or

.
 To end prematurely, switch off the heating device.
Heating duration runback timer
The maximum heating duration, limited to 2 hours at
the factory and adjustable in four stages of 30 minutes
each, can be changed as shown in the table.
 Press and hold the MENU key and the FORWARD
key for five seconds.
 rb display flashes.

Press the ENTER key. The ON symbol flashes.
 Press the ENTER key. The heating duration
program flashes. For variants, see table, left
column (factory setting 2 h).
 Press

or

to select the desired heating
duration program. Press the ENTER key. The room
temperature flashes.
 Use

or

to set the room temperature and
confirm with ENTER.
 Confirm the BACK key to return to the standard
display.
Heating
duration
program
Press the FORWARD key:
1 time 2 times 3 times 4 times
30 minutes 00:15 00:20 00:25 00:30
01:00 h 00:15 00:30 00:45 01:00
01:30 h 00:15 00:30 01:00 01:30
02:00 h
(factory)
00:30 01:00 01:30 02:00
04:00 h 01:00 02:00 03:00 04:00
06:00 h 01:30 03:00 04:30 06:00
08:00 h 02:00 04:00 06:00 08:00
10.6 Minimum room temperature
This function can be used to ensure that a minimum
room temperature is specified even during OFF times,
for example in timer mode (week program).
The specification also applies for the runback timer
function. Frost protection mode has priority.
 Press and hold the MENU key and the FORWARD
key for five seconds. rb display flashes.
 Press the

key The display Sb flashes.