Important Safety Advice
When using electrical appliances, basic
precautions should always be followed to reduce
the risk of fire, electrical shock and injury to
persons, including the following:
If the appliance is damaged, check with the
supplier before installation and operation.
Do not use outdoors.
Do not use in the immediate surroundings of a
bath, shower or swimming pool.
Do not locate the appliance immediately below a
fixed socket outlet or connection box.
The appliance carries the Warning symbol
DO NOT COVER, indicating that it must
not be covered.
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
not be made by Children without supervision.
Children of less than 3 years should be kept
away unless continuously supervised. Children
aged from 3 years and less than 8 years shall
only switch on/off the appliance provided that
it has been placed or installed in its intended
normal operating position and they have been
given supervision or instruction concerning use
of the appliance in a safe way and understanding
the hazards involved. Children aged from 3
years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user
maintenance.
Do not use this appliance in series with a
thermal control, a program controller, a timer
or any other device that switches on the heat
automatically, since a fire risk exists when the
appliance is accidentally covered or displaced.
Ensure that furniture, curtains or other
combustible material are positioned no closer
than 1 metre from the appliance.
In the event of a fault unplug the appliance.
Unplug the appliance when not required for long
periods.
Although this appliance complies with safety
standards, we do not recommend its use on deep
pile carpets or on long hair type of rugs.
The appliance must be positioned so that the plug
is accessible.
If the supply cord is damaged it must be replaced
by the manufacturer or service agent or a
similarly qualified person in order to avoid a
hazard.
Keep the supply cord away from the front of the
appliance.
Warning: In order to avoid overheating, do not
cover the appliance. Do not place material or
garments on the appliance, or obstruct the air
circulation around the appliance, for instance
by curtains or furniture, as this could cause
overheating and a fire risk.
Warning: In order to avoid a hazard due to
Nelson
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
CAUTION - Some parts of this product can
become very hot and cause burns. Particular
attention has to be given where children and
vulnerable people are present.
This appliance is not equipped with a device
to control the room temperature. Do not use
this appliance in small rooms when they are
occupied by persons not capable of leaving the
room on their own, unless constant supervision
is provided.
General
Unpack the heater carefully and retain the packaging for
possible future use, in the event of moving or returning
the fire to your supplier. The fire incorporates a flame
effect, which can be used with or without heating, so that
the comforting effect may be enjoyed at any time of the
year. Using the flame effect on its own only requires little
electricity. These models are designed to be free standing
and are normally positioned against a wall.
Before connecting the heater check that the supply
voltage is the same as that stated on the heater.
Please note: Used in an environment where background
noise is very low, it may be possible to hear a sound
which is related to the operation of the flame effect. This
is normal and should not be a cause for concern.
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED
This heater must be used on an AC ~ supply only and
the voltage marked on the heater must correspond to
the supply voltage. Before switching on, please read the
safety warnings and operating instructions.
Controls - see Fig. 2
Three switches provide a choice of heat settings. A switch
is in the ON position when the side with the markings on
(i.e. I, I, or II) is pushed in.
Switch 1 (I) Controls the electricity supply to the heater
and flame effect.
Note: This switch must be in the ON (I) position for heater
to operate with or without heat.
Switch 2 (I) Provides 1kW heat output
Switch 3 (II) Provides 2kW output with switch 2
Remote control
- see
Fig. 3
Remote control - see Fig. 5
The maximum range of use is ~ 7metres.
Warning: It takes time for the receiver to respond to the
transmitter. Do not press the buttons more than once within two
seconds for correct operation.
1. To activate the remote control remove the battery isolation
strip, which is used to ensure your remote control reaches you
fully charged.
2. To replace the remote control battery, turn over the remote
control, and follow the diagram embossed on the remote control.
3. Only use CR2025 or CR2032 size of batteries.
EN
Summary of Contents for NELSON DELUXE NLS20RC
Page 2: ...1 4 2 3 C L...
