Dimplex M Flex Air, Installation And Operating Instruction

Page: 9 / 40

www.glendimplex.de DOK4x HOIAO FxDEN · FD 0001 7
Air-to-water heat pump M Flex English
4 Transport
4.1 Outdoor unit
A pallet should be used to transport the heat pump to its final
installation location. The outdoor unit can be transported with a
lift truck, hand truck or similar.
Once the side sections have been removed, the outdoor unit
can be lifted by the cover. For this, loosen the two screws at the
top, tilt the metal plate to the side and remove at the top (see
step 1-3)
4.2 Indoor unit
A lift truck is suited for transporting the unit on a level surface.
Carrying straps may be used if the heat pump needs to be
transported on an uneven surface or carried up or down stairs.
These straps can be passed directly underneath the pallet.
To lift from the pallet, the indoor unit can be tilted back by up to
45° and lifted by the handles on the back at the top.
Tilting more than 45° is not permitted.
Once the two side sections have been removed, the device also
has the option of inserting ¾“ support tubes through the holes
in the frame.
The casing panels must be dismantled in the order outlined be-
low.
The right side panel must be removed first. For this, loosen the
two screws at the top, tilt the metal plate to the right and re-
move at the top (see step 1-3). The left side panel can be re-
moved in the same way.
The front panel can then be removed.
For this, loosen the two screws on the right frame at the side.
Push the metal plate approx. 10 mm to the right, then push it
forwards slightly and remove at the top (see step 4-7). Discon-
nect the connection cables on the display screen.
1.
2.
3.
1.
45°
ma
x.
1.
1.
2.
3.
4.
6.
7.
5.
4.