background image

Electrical connection

WARNING: 

This Appliance must be earthed

If the socket outlets in your home are not of the 13 amp 
BS1363 type they will not accept the plug connected 

over.

DO NOT

 operate the radiator with the mains lead 

overhanging the outlet grille.
If the radiator is tipped over, unplug it and allow it to 
cool before standing it back up.

DO NOT 

pull, carry or move the appliance using the 

power cable.
The supply cord should be uncoiled before use.
This instruction leaflet belongs to the appliance and 
must be kept in a safe place. If changing owners, the 
leaflet must be surrendered to the new owner.

to this heater, therefore cut off the plug. When cut off 
this plug can constitute a shock hazard if inserted into 
a socket outlet. It must therefore be disposed of safely.

IMPORTANT:

 The wires in this mains lead are coloured in 

accordance with the following code:

BLUE: 

  NEUTRAL

BROWN: 

  LIVE

GREEN & YELLOW: 

EARTH

As the colours of the wires in the mains lead may not 
correspond with the coloured markings in your plug, 
proceed as follows:
Connect the BROWN wire to the terminal marked ‘L’ or 
coloured RED. Connect the BLUE wire to the terminal 
marked ‘N’ or coloured BLACK. Note: ‘L’ or ‘N’  must 
not be connected to the EARTH terminal marked ‘E’ or 
‘ ’ or coloured GREEN or GREEN AND YELLOW. If in 
doubt, consult your electrician.

329

590 (FutG2..)

740 (FutG3..)

644

Models 

 

       

Model

Description

Power

FutG2BT

Electronic thermostat control with 7 day programmable timer.

2.0 kW

FutG3BT

Electronic thermostat control with 7 day programmable timer.

3.0 kW

General

The radiator is designed for operation on an AC electricity supply, and is suitable for use in domestic dwellings and 
similar indoor locations.
The radiator is fitted with castors and handles for ease of movement. An electronic control provides the ability to 
choose from various operational modes including Manual, Auto and boost. Auto mode offers seven day programmable 
time and temperature functionality.  It is supplied with a cord and plug and is ready for use once the castors have been 
correctly fitted.

Dimensions & Range Info

Summary of Contents for FutuRad FutG2BT

















Reviews: