EN-30 459462.66.01 · 10/14/B
www.dimplex.de/en
E
n
g
lis
h
FSR 15-35 / FSR 15-35 GS / FSR 15-35 GW
5 Assembly
5.1 Disassembling device
Fig. 13: Remove the storage heater from its packaging. Dis-
pose of the packaging material properly. Unscrew wall
bracket from rear wall. To do this, remove the two safety
screws for transport (A).
.
Fig. 14: Attach the two side wall brackets to the rear side of
the equipment. Attach the upper wall bracket to the two side
wall brackets.
Fig. 15: Remove the screws from both side panels (A). Slide
the side panels downwards (1) and swing them out (2). After
the side panels have been removed, unscrew the fixing
screws (B) on the front grille and remove the front grille. Then
unscrew the fixing screws (C) for the front panel.
Fig. 16: Pull the front panel forwards while lifting it gently to
remove it from its rear attachment.
1
2
