Dimplex BWP 30 HS, Installation And Operating Instructions Manual

Page: 28 / 60

EN-12
English
12
12 Technical data
1 Domestic water heat pump
BWP 30HS BWP 30HSD
2 Design
without defrosting with automatic defrosting
2.1 Nominal cylinder volume l 290 290
2.2 Cylinder material
Enamelled steel according to DIN
4753
Enamelled steel according to DIN
4753
2.3 Nominal cylinder pressure bar 10 10
3 Model
3.1 Dimensions height (max.) x cross-section (max.) cm 172 x 70 172 x 70
3.2 Weight (empty) kg Approx. 150 Approx. 150
3.3 Electrical connection (ready-to-plug - supply cable length approx. 2.7 m) 230 V ~ 50 Hz 230 V ~ 50 Hz
3.4 Fuse A 16 16
3.5 Refrigerant R134a, filling weight kg 1.0 1.0
4 Performance data
4.1 Temperature operating range in
1
°C
1. At temperatures below 8 °C
±1 °C / -8 °C ±1 °C, the heating element is automatically switched on and the heat pump module off.
8 to 45 -8 to 45
4.2 Water temperature (heat pump operation
±1.0 K
) °C
25 to 60 25 to 60
4.3 Heat-up time from 15 °C to 60 °C
2
h
2. Heating up of the nominal volume from 15 °C to 60 °C at an air intake temperature of 20 °C and a relative humidity of 70 %
8.5 8.5
4.4 Power consumption of supplementary electrical heating W 1500 1500
4.5 Mean power consumption at 60 °C
2
W
590 590
4.6 Mean heat output at 45 °C
3
W
3. Heating up of the nominal volume from 15 °C to 45 °C at an air intake temperature of 15 °C and a relative humidity of 70 %
1870 1870
4.7 COP (t) according to EN 255 at 45 °C W 3.65 3.65
4.8 Stand-by energy consumption at 45 °C / 24 h (W) 37 37
4.9 Sound pressure level
4
dB(A)
4. At a distance of 1 m (free-standing installation or installation without an exhaust air duct or with a 90 °C pipe bend on the exhaust air side)
50 50
4.10 Air flow m
3
/h
400-550 400-550
4.11 External compression Pa 100 100
4.12 Maximum air duct connection length (total) m 10 10
5 Connections
5.1 Air duct connection diameter mm 160 160
5.2 Transfer area of the internal heat exchanger m
2
1.45 1.45
5.3 Sensor pipe internal (for sensor – heat exchanger operation)mm
12 12
5.4 Circulation pipe connection external thread R 3/4" R 3/4"
5.5 Domestic hot water outlet connection external thread R 1" R 1"
5.6 Cold water inlet connection external thread R 1" R 1"
5.7 Internal heat exchanger external thread R 1" R 1"