Comparison of 2D and 3D Mode
If the screen appears blurred or the LED signal lamp is red, the display is in 3D mode.
1
2
For switching from 3D mode to 2D mode, press the [2D/3D] button at the OSD control
on the front of the monitor. The display now works in 2D and the LED signal lamp is
green.
In 2D mode, various hotkeys can be used and most functions of the monitor can also
be controlled through the OSD menu.
3
4
For switching from 2D mode to 3D mode, press the [2D/3D] button at the OSD control
on the front of the monitor. The display now works in 3D and the LED signal lamp is red.
5
To view 3D content, the source has to be in a 3D format. (Notice! A general 2D image
cannot be viewed with a 3D effect.)
6
To inquire about sources for 3D content, please refer to our service center.
7
3D content formats can be divided into four types:
Frame Sequential, Side-Field, Sub-Field, and Interlace Stereo.
This division is according to the method the content was produced with. The format for
watching this content on our monitor has to be chosen accordingly (select with left and
right buttons when switching into 3D mode)
Set up 13