3
CHAPTER
2D Mode
Adjustments in 2D Mode
Please check whether the color of the LED signal lamp is green. If it is red, please switch into
2D mode by pressing the [2D/3D] button.
▒
Change of Input Channel
When pressing the [
▶
] button in 2D mode, you can switch between linked analog or DVI input
channels. In case of no additional input being connected, the monitor remains in its previous
setting.
▒
Automatic Screen Control
When pressing the [AUTO] button in 2D mode, the monitor setup is automatically fixed in the
optimal setting. After pressing the [AUTO] button you can choose whether to save the new
setting by selecting either the thumbs up or thumbs down icon displayed on the screen. Move
between icons with the left and right buttons, save by pressing the [2D/3D] button, which
functions as an ‘Enter button’ here.
▒
Navigating the MENU
1
When pressing the [MENU] button in 2D mode, the screen shows the OSD (On Screen
Display) menu. With this menu you can set and change all settings of the monitor.
2
Inside the OSD menu, the [MENU] button is used to switch between sub-menus
(Brightness, Color, etc.) The [AUTO/REV] button is used when selecting details inside
the menu with up and down movements. The [
◀
] & [
▶
] buttons are used to decrease or
increase values. The [2D/3D] button is used to select a setting (Enter function) and to
exit the OSD. All functions of the OSD menu can be operated with the above
mentioned four buttons.
Chapter 3
14
