DIMA HC-100, Service Manual

Page: 52 / 174

Chapter 6 HYBRID Coater Service Manual ver1.1
50
6. Electrical Wiring
6.1 Electrical Wiring Diagrams
At this moment there are 2 revisions of the Electrical Wiring Diagram. The serial number of
the machine determines which revision is valid.
Appendix A shows the wiring diagrams of the electro panel with Revision 1.0. Other wiring
diagrams match with Revision 1.1.
Appendix B shows the wiring diagrams with Revision 1.1.

Serial numbers HC-100

Revision

Connection
PCB

Dispense Head
PCB

600200700001

1.0

EL-04875

none

600200700002

1.0

EL-04875

none

≥ 600200700003

1.1

EL-04875

EL-04879

Serial numbers HC-200

Revision

Connection
PCB

Dispense Head
PCB

601200600002 till
601200600005

1.0

EL-04875

EL-04876

601200700001

1.1

EL-04875

EL-04876

≥ 601200700002

1.1

EL-04875

EL-04806
Most changes at Revision 1.1 are made on the electro panel:

The voltage used for the control circuit (on, off and emergency stop button) is
changed from 230VAC to 24VAC.

Numbers of connectors on the electro panel are changed.
6.2 Overview of the Wiring Diagrams
The HYBRID-C exists of several modules. Each have their own wiring circuit diagram. The
drawing numbers have the following pattern:
MHC-0200-yyzz

yy : running number

zz : module number