16
USER SETTING PROJECT
The KT-LCD3 meter provides users with 3 depths of settings which are s:
• General Project Setting
• P Parameter Setting
• C Parameter Setting
To enter the general project setting, simultaneously hold button and button
for 3 seconds within 5 seconds of turning the meter on. The current setting will be
indicated by a flashing sign. To scroll through the menu, press the button.
Once the general project menu has been cycled through, the display will cease
flashing. Now enter the P Parameter settings by simultaneously holding button
and button for 3 seconds. The same method to scroll through the menu can be
applied and the meter will flash specific icons indicating the setting currently open.
Once the flashing has stopped, hold down both the and button again to
progress to the C parameter settings. To exit these settings at any stage, simply hold
down the button where the meter will return to display 1. If no button operation
occurs for 60 seconds whilst in a settings menu, the KT-LCD3 will discard changes and
return to display 1. To exit at any moment, hold and the meter will discard any
unsaved changes and revert to display 1.
GENERAL PROJECT SETTING
Turn on meter, and within 5 seconds of start-up simultaneously hold button
and
button for 3 seconds to enter general project settings. “MXS” and the speed
will be displayed, indicating the maximum riding speed (Refer to image below for
illustration). To adjust, press the button to increase or button to decrease
the speed. Once desired speed has been selected, press the button to confirm
changes and move onto wheel diameter.
Maximum Trip Speed
Unit
Metric
Imperial
Speed
Km/H
MPH
Distance
Km
Mil
Temperature
°C
°F