Saf
ety P
recautions
32
WARNING
Be sure to read the following
warnings before use.
Turn off the product or put it in Airplane mode before
boarding an airplane. Use of cell phones on board is
restricted. Follow the instructions of each airline.
Failure to do so may adversely affect on-board
electronic equipment. Prohibited acts related to cell
phone usage on an airplane may be punished by law.
For using the product in hospitals or medical
institutions, abide by the instructions of that hospitals
or medical institutions. Turn off the product where use
of the product is prohibited.
Failure to do so may affect electronic equipment and
electronic medical equipment.
Do not send data by infrared communication with the
infrared port pointing toward eyes. Doing so might
affect eyes. Also, sending data with the infrared port
pointing toward some other infrared device might
cause false operation, etc.
Do not light the photo light/simple light in front of a
person's eyes. Do not gaze at the light emitting part
when the photo light/simple is lighted. Doing so might
cause impairment of eyesight, etc. Be especially
careful not to shoot small children from a very close
distance.
Sometimes, very rarely some people demonstrate
symptoms such as temporary muscle spasms, loss of
consciousness, etc. by watching repeatedly flickering
screens. Those with a past history of this should
consult with a physician beforehand.
Chemically strengthened glass is used for the display
of the product. In case it is broken, do not touch
the broken part. Doing so might cause injury by the
broken part. Contact an au shop or Keitai Guarantee
Service Center.
CAUTION
Be sure to read the following
cautions before use.
Use of the main unit in an automobile sometimes
affects on-vehicle electronic devices, though this
rarely happens. If this happens, stop use since this
may impair safe travel.
If you feel any abnormality with your skin, immediately
consult a dermatologist. Itching, rashes, eczema,
etc. sometimes occurs depending on your physical
constitution and condition.
The materials of parts used on the product are as
follows.
