10
Get
ting R
ead
y
Attaching/Removing au Nano IC
Card 04
• Before installing or removing
your au Nano IC Card 04,
be sure to turn the product
off. Also, make sure that
the microUSB plug of the
specified AC adapter or other
accessory is disconnected
from the product.
IC (metal) part
au Nano IC Card 04
• The product is compatible with the au Nano IC Card 04
only. You cannot use the product with an IC card other
than the au Nano IC Card 04.
◎
Note the following points, otherwise handling the au Nano
IC Card 04 may cause malfunction or damage to the
card, the tray or the product.
• Do not touch the IC (metal) part of the au Nano IC Card
04 or the IC card terminal inside the product.
• Insert in the correct direction.
• Do not use force to attach or remove.
◎
When the au Nano IC Card 04 is not attached properly or the
au Nano IC Card 04 is abnormal, an error message appears.
◎
Do not lose the au Nano IC Card 04 after it has been
removed.
◎
Do not insert your au Nano IC Card 04 with an adapter
attached to it. Doing so might cause a fault.
Attaching au Nano IC Card 04
• When installing your au Nano IC Card 04, be sure to
use the supplied IC Card Tray Ejecting Tool for KYV36
(sample).
1
Turn the power off and open the card slot
cover
2
Hook the IC Card Tray Ejecting Tool for
KYV36 (sample) on the edge of the tray and
pull it out
Tray
IC Card Tray Ejecting Tool for
KYV 36 (sample)
