11
Get
ting R
ead
y
3
Place the au Nano IC Card 04 on the tray,
making sure that the notch is oriented
properly, then insert the tray straight into the
au Nano IC Card 04 slot (upper side)
After the tray is inserted, hook the IC Card Tray
Ejecting Tool for KYV36 (sample) on the edge of the
tray and press it all the way.
• Take care so that the au Nano IC Card 04 does not get
over the tray. Do not apply excessive force and insert
it all the way straight into the slot. If the tray does not
fit into the slot, do not press it with force. Pull the tray
out and insert it again with the front edge raised. If the
au Nano IC Card 04 gets over the tray, the product
might not recognize the au Nano IC Card 04.
Notch
Edge of tray
au Nano IC Card 04
slot (upper side)
microSD memory card
slot (bottom side)
4
Close the card slot cover
Removing au Nano IC Card 04
• When removing your au Nano IC Card 04, be sure to
use the supplied IC Card Tray Ejecting Tool for KYV36
(sample).
1
Turn the power off and open the card slot
cover
2
Hook the IC Card Tray Ejecting Tool for
KYV36 (sample) on the edge of the tray and
pull it out
Tray
IC Card Tray Ejecting Tool for
KYV 36 (sample)
