Chapter 2: Card Installation
Installing Asterisk
If you wish to use Asterisk with your new hardware, you can follow the
instructions below.
Note:
The new method for configuring the B410P requires Asterisk
1.6 (or later), DAHDI, and libpri 1.4.4 (or later). If you wish to use the
old, unsupported method which works with Asterisk 1.4, you will need
to follow the installation procedure for mISDN and mISDNuser which
is available at http://www.misdn.org/. The configuration procedure
for mISDN is listed in Chapter 3—“Configuration”. Please be aware
that Digium does not provide support for mISDN.
1.
Download the latest release version of Asterisk. Substitute the version
of Asterisk for the X.X in the command below. Asterisk is available
for download from:
http://downloads.digium.com/pub/telephony/asterisk
# wget http://downloads.digium.com/pub/telephony/
asterisk/asterisk-X.X-current.tar.gz
2.
Expand the downloaded file, compile its contents, and install the
application. Substitute the version of Asterisk for the the X.X and
X.X.X in the command lines below.
# tar -zxvf asterisk-X.X-current.tar.gz
# cd asterisk-X.X.X/
# ./configure
# make menuselect
# make
Digium, Inc.
Page 26
