Chapter 2: Card Installation
0000:01:0e.0 ISDN controller: Unknown device
d161:b410 (rev 01)
Note:
The output from
lspci
may or may not state “Unknown device”.
If it does, this does not indicate a problem.
The Digium B410P card identifier should be listed. If a matching card
identifier is not listed, then your machine is not PCI 2.2 (or higher),
and the card will not work with your motherboard.
2.
Download the latest version of libpri. Substitute the version of libpri
for the X.X in the command line below. libpri is available for
download from:
http://downloads.asterisk.org/pub/telephony/libpri
# wget http://downloads.asterisk.org/pub/telephony/
libpri/libpri-X.X-current.tar.gz
Note:
There is no correlation between the versioning of libpri and
Asterisk. The libpri 1.4 branch will function with the Asterisk 1.6 and
1.8 branches.
3.
Expand the downloaded file, compile its contents, and install the
libraries. Substitute the version of libpri for the X.X and X.X.X.X in
Digium, Inc.
Page 24