Chapter 2: Card Installation
To install your B410P card, you will need:
Full Linux kernel 2.6.15 (or later) source code.
Development libraries and headers for ncurses
Development libraries and headers for zlib and openssl
Development libraries and headers for newt
GCC and standard software build tools
It is recommended that you use the most recent version of the Asterisk,
DAHDI, and libpri software for the best results. If you have previously
installed any of these, Digium recommends that you upgrade to the latest
“-current” version of each.
Note:
The new method for configuring the B410P requires Asterisk
1.6 (or later), DAHDI, and libpri 1.4.4 (or later). If you wish to use the
old, unsupported method which works with Asterisk 1.4, you will need
to follow the installation procedure for mISDN and mISDNuser which
is available at http://www.misdn.org/. The configuration procedure
for mISDN is listed in Chapter 3—“Configuration”. Please be aware
that Digium does not provide support for mISDN.
1.
After the machine has booted to Linux, log in and execute the follow-
ing command to list the devices detected by the PCI bus:
# lspci -n
Confirm that the output from
lspci
lists a device with Digium’s PCI
vendor ID which is “d161”. The screen output should be similar to the
following:
Digium, Inc.
Page 23