Chapter 3: Configuration
Driver Configuration
Using DAHDI:
1.
Begin by opening the
system.conf
file from the
/etc/dahdi
directory.
2.
Specify the two letter country code for your loadzone and defaultzone.
This will preload tone zone data and specify a default tone zone for
your interfaces.
The following is a typical setup for a telco in Spain:
loadzone = es
defaultzone = es
3.
Configure the Span Map.
For each BRI line you are using, you will need to define a span. The
Span Map includes defining the span number, timing, line build out,
framing, and coding. Configuration details for each of these items is
explained in this section.
span => <Number>,<Timing>,<Line Build
Out>,<Framing>,<Coding>[,Yellow]
Digium, Inc.
Page 29