Windows 2000/XP/2003/Vista/7 Troubleshooting
Multi-Segment LAN Environment Installation (through the Network Print Port)
If your print server and Windows 2000/XP/2003/Vista/7 are located on two different
segments, and your Windows NT server is used as the router/gateway you will need to
implement the following procedures in order for your print server to function properly:
Add the RIP for NWLink IPX/SPX compatible transport. See
RIP for NWLink IPX/SPX
compatible transport Installation Procedure
later in this section.
Add the frame type 802.2 for both Ethernet adapters. See
Multi-Segment Frame Type
802.2 Installation
later in this section.
RIP for NWLink IPX/SPX compatible transport Installation Procedure
1.
From your Windows NT server that is used as a router, select
Start
from the bottom
left hand corner of the screen.
2. Select
Settings
.
3. Select
Control Panel
.
4. Double-click
the
Network
icon.
5. Select
Services
.
6. Select
Add
.
7.
In the Select Network Service box, select the
RIP for NWLink IPX/SPX compatible
transport
. Click
OK
.
8.
Follows the directions on the screen.
9. Done.
Multi-Segment Frame Type 802.2 Installation
1.
From your Windows NT server that is used as a router, select
Start
from the bottom
left hand corner of the screen.
2. Point
to
Settings
, and select
Control Panel
.
3. Double-click
the
Network
icon.
4. Select
Protocols
.Select the
NWLink IPX/SPX Compatible Transport
.
5. Select
Properties
.
