DigiTech JamMan SOLO XT, Owner'S Manual

Page: 30 / 72

24
To Undo/Redo/Clear a recorded overdub:
1.
Select an existing loop in memory
using the
<UP/DOWN>
buttons or
load an empty memory location and
record and store a new loop.
2.
Record your overdub as described in
“
Operation > Recording Overdubs
”. When
done, press the
<PEDAL SWITCH>
to initiate loop playback (the
STATUS
LED will light green).
3.
To Undo an overdub, press and hold
the
<PEDAL SWITCH>
while the
loop is playing until the
STATUS
LED
begins to quickly flash yellow and you
see
und
in the LED display. The Undo
function is now complete.
4.
If you wish to restore (Redo) an
overdub, ensure the loop is still playing
and press and hold the <
PEDAL
SWITCH>
again until the
STATUS
LED begins to quickly flash yellow and
you see
rEd
in the LED display. The
Redo function is now complete.
5.
Repeat steps 3 and 4 to compare the
original loop with the loop containing
the newly recorded overdub.
6.
To clear the overdub, stop loop
playback by quickly pressing the
<PEDAL SWITCH>
twice and
continue to hold the
<PEDAL
SWITCH>
until the
STATUS
LED
begins to quickly flash yellow and you
see
CLr
in the LED display. The Clear
function is now complete.
NOTE:
The Clear function cannot be undone! Clearing can also be done using an FS3X footswitch
(see “ Optional FS3X Footswitch ”). Clear, Undo, and Redo functions are no longer available once the
loop or overdubs have been stored to memory.