18
Recording a Loop Using Pedal Tempo (Auto Quantize)
See “
Setup > Pedal Tempo
” for information on enabling the Pedal Tempo feature.
1.
Select an empty memory location
using the
<UP/DOWN>
buttons
(
LOOP
and
SINGLE
LEDs will be off).
2.
Set the
<RHYTHM LEVEL>
control
to the 9 o’clock position.
3.
Press the
<PEDAL SWITCH>
a few
times at the rate you want the phrase
tempo to be. You will begin to hear
the Rhythm Guide Track and the beats
will be indicated by a flashing
TEMPO
button LED. Repeat this step to fine
tune the tempo, if necessary. When
using the Rhythm Guide Track, time
signature can be manually set to a
different time signature other than the
default of 4 beats per measure (see
“
Setup > Time Signature
”).
4.
To exit Pedal Tempo Mode and
prepare for recording, press and
hold the
<PEDAL SWITCH>
until
the
TEMPO
button LED repeatedly
flashes yellow, then release.
5.
Press the
<PEDAL SWITCH>
to
initiate recording. You will receive
a one bar count in, indicated by a
flashing red and green
STATUS
LED.
After the count in, begin playing with
the first beat to start recording.
Recording will be indicated by a solid
red
STATUS
LED.
6.
As soon as you’re done recording,
press the
<PEDAL SWITCH>
again to
stop recording and initiate playback.
7.
Quickly press the
<PEDAL SWITCH>
twice to stop loop playback.
8.
Press the
<STORE>
button twice if
you wish to store the loop.
Summary of Contents for JamMan SOLO XT
Page 1: ...Owner s Manual...
Page 69: ...63 This page intentionally left blank...
Page 70: ...64 This page intentionally left blank...
