DigiTech JamMan SOLO XT, Owner'S Manual

Page: 23 / 72

17
Recording a Loop (Auto Quantize)
Pedal Tempo Off (Default)/Auto Record Off (Default)
1.
Select an empty memory location
using the
<UP/DOWN>
buttons
(
LOOP
and
SINGLE
LEDs will be off).
2.
Set the
<RHYTHM LEVEL>
control
to the 9 o’clock position then tap
the
<TEMPO>
button a few times at
the rate you want the phrase tempo
to be. You will begin to hear the
Rhythm Guide Track. The beats will
be indicated by a flashing
TEMPO
button LED, flashing red on the first
downbeat and green on all remaining
beats of the measure. When using the
Rhythm Guide Track, time signature
can be manually set to a different time
signature other than the default of 4
beats per measure (see “
Setup > Time
Signature
”).
3.
Press the
<PEDAL SWITCH>
to
initiate recording and begin playing.
You will receive a one measure count
in, indicated by a flashing red and
green
STATUS
LED. After the count
in, begin playing with the first beat
to start recording. Recording will be
indicated by a solid red
STATUS
LED.
4.
As soon as you’re done recording,
press the
<PEDAL SWITCH>
again
to stop recording and initiate playback.
Quickly press the
<PEDAL SWITCH>
twice to stop loop playback.
5.
Press the
<STORE>
button twice if
you wish to store the loop.