DW E.S.T. (Elevated Skin Temperature) System
-9-
6. Software Download and Installation
6.1. Download Software and Camera Network Configuration
1. Install the
Elevated Skin Temperature System_x.x.x.x_Setup.exe.
The software is available on
Digital Watchdog’s website.
a. Go to
http://www.digital-watchdog.com
b. Search for ‘
EST software
’ in the search bar at the top of the page.
c. The latest software will appear in the search results. Click on the link to download the file to your
computer and run the installation file.
2. Connect the Camera to the monitoring PC via LAN cable directly (CAT.5E UTP cable).
3. When the camera connects directly to the PC, the following is assigned to the camera by default:
•
Default Camera IP address: 169.254.100.100
•
Default Subnet mask: 255.255.0.0
4. Open the execution window on the monitoring PC by pressing the “Windows (
) + R” keys.
5. Enter
‘ncpa.cpl’
and press the ‘
Enter
’ key.
6.
Right-click
on
‘Ethernet’
and select
‘Properties’
from the drop-down options.
7. Double-click on ‘
Internet Protocol version 4 (TCP/IPv4)’
in the Properties window.
8. Enter the IP and subnet mask as shown below and click the ‘
OK
’ button.
