DW E.S.T. (Elevated Skin Temperature) System
-20-
8.4. Alarm setting
This section, located on the center-left side of the software is enabled when "
Alarm On
" is selected in
“
Function”
. To edit any of the settings in this section,
“Modify”
must be selected first.
<Alarm Settings Options>
Setting
Description
Alarm Setting
Temp (°C)
Set the minimum and maximum temperature range that would trigger an alarm.
The maximum temperature cannot be changed and is set by default to 104°F (40°C).
NOTE:
Measurements captures within the set threshold will trigger an alarm.
Color Warning
Select the warning color from the available drop-down options.
When an alarm occurs, the face detection
box and the measured face temperature on
the temperature field will change to the set
color.
By default, the warning color is set to red.
NOTE:
All pixels whose temperature falls
within the “
Alarm setting Temp.
” range are
expressed in the color set in the “
Color
Warning
”.
Use Sound
Effect
Enable or disable an audio alarm when the temperature is detected within the “
Alarm
setting Temp.
” range.
Sound Effect
File Path
If “
Use sound effects
” is enabled, select the audio sound file to play when the alarm is
triggered. Click the folder button and find the audio file in the directory path of your PC.
The default audio file is "
warning_sound.select wav
"
The software supports .wav and .mp3 file formats.
Only short and simple sound effects can be used. (No songs, no classical music, etc.)
Listening in
Advance
Listen to the file that is set as a sound effect.