Digital Projection THUNDER 10000sx, User Manual

Page: 33 / 56

E – 27
A List of Direct Key Combinations
CTL+ INPUT (1-10) Switches to any selected signal found in the Entry List.
To enable this combination, you must first assign specific remote keys for direct input
selection in the Entry Edit window.
CTL+ ENTER (While displaying Entry list) Displays the Entry Edit Command window.
CTL+ MUTE PICT/SHUT Blocks all Projector Light Output.
CTL+CANCEL Returns to the previous menu without closing the slidebar or dialog.
CTL+ UNDO Clears all menus or adjustment/setting screens. All adjustments are saved automatically.
CTL+
䊴
/
䊳
/
▲
/
▼
Moves the slidebar or dialog box horizontally or vertically.
While using zoom on remote control: Displays the magnifying glass icon.
CTL+
䊴
Deletes one letter or numeral in the entry screen.
CTL+MUTE OSD Turns off the on-screen display. Press again to turn on the on-screen display.
INPUT(1-10) in SW Level mode Displays the Select switcher Input Slot window.
NOTE: This feature is available for SW 2 Level mode only.
When the SW 1 Level mode is selected, pressing INPUT key switches to the corresponding
slot without displaying the Select Slot window.
CTL+ MENU/ADDRESS Displays the remote ID entry window.
CTL+ IMAGE/PROJECTOR Sequentially selects the Projector Options sub menu.
CTL+ POSI/LENS Displays the Lens Shift control window.
CTL+ KEYST/R Turns on red. Available only when the projector is in the test pattern mode.
CTL+ AMP/G Turns on green. Available only when the projector is in the test pattern mode.
CTL+ E-LIST/B Turns on blue. Available only when the projector is in the test pattern mode.
CTL+ MAGNIFY/ZOOM Zooms the lens in and out
CTL+ FOCUS Adjusts the lens focus.