Digital Projection THUNDER 10000sx, User Manual

Page: 49 / 56

E – 43
Contact Closure
Switcher
(2) D-sub 15 pin In/Out
Addressable Remote Control (wired / wireless)
Power Requirement 200-240 VAC, 50/60Hz
Input Current 14 A
Power Consumption 2.8 kW
BTU 9554 per hour
Air flow 250 M
3
/ hr
Air Inlet Underside front centre
Air Outlet Rear of left side (viewed from rear)
Mechanical
Installation Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Stacking: Up to 2 projectors can be gravity stacked
Dimensions 26.8"(W)
⳯
40.0"(D)
⳯
16.5"(H) with lens hood and feet (not including stacking pads and handle)
680 mm(W)
⳯
1016 mm(D)
⳯
420 mm(H) with lens hood and feet (not including stacking pads and handle)
Net Weight 185.3 lb (84Kg) (without lens)
Environment Operational Temperature: 40˚ to 95˚F / 5˚ to 35˚C,
Humidity: 20-80% non-condensing
Storage Temperature: 14˚ to 122˚F / -10˚ to 50˚C
Humidity: 20-80% non-condensing
Fan Noise 48dB
Regulations USA UL 1950 FCC Class A
Canada CSA950 ( C-UL )
Europe EN60950 EN55022 Class A EN55024 EN61000-3-2 EN61000-3-3
Japan J60950 VCCI
Oceania EN60950 AS/NZS3548 Class A
Asia EN60950 CISPR22 Class A
*1: Permissible deviation for RGB convergence (Pixel deviation) is 1/2 pixel or less at center; 3/4 pixel or less around the perimeter (when projection
upward angle is 0˚).
*2: When using the zoom lens, it is recommended that the projector is positioned at an angle of from -15 to +15 degrees from the horizontal.
Specifications are subject to change without notice.
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.