Digital Projection THUNDER 10000sx, User Manual

Page: 50 / 56

E – 44
7. Optional Accessories
Lens TL-08SF LA00111(Short Focal Lens 0.84) : 10kg
TL-1ZH LA00263 (Zoom Lens 1.5 - 2.5:1) : 5.5kg
TL-2Z LA00108 (Zoom Lens 2.5 - 4.0:1) : 4.5kg
TL-4Z LA00109 (Zoom Lens 4.0 - 7.0:1) : 4.5kg
Interface Board SD-SDI BOARD LA00105
HD-SDI BOARD LA00204
Ceiling Mount Kit XL CMKIT LA00264
Switcher ISS-6020 Video/RGB Switcher
A Serial Digital Interface (SDI) board is optionally available.
SD-SDI BOARD
This board accepts the input of non-compressed signal sources such as commercial type digital VTR (e.g., D1/D5-VCR) compatible with digital
serial component signals (of the SMPTE 259M-C standard) and provides a high quality image without quantization noise. Note that the BNC cable
used with the SDI connector should be Belden 8281 cable, or 3C-2V equivalent cable or better.
Packaged items: SDI board (1), shield case (1), connector cable (1), and installation manual (1)
REMOTE 3 (XLR) Pin Assignments and Signals
IN OUT
Pin No. Signal Pin No. Signal
1 Ground 1 Ground
2 +3.3V 2 No connection
3 DATA IN 3 DATA OUT
REMOTE3
IN OUT
1
1
2
2
3
3
NOTE: The wireless remote control can operate even if the plug of the remote cable is inserted into REMOTE 3 (XLR) connectors.
For the wireless remote control not to operate, insert the plug of the remote cable into the REMOTE2 IN jack.
System
1920x1035/60/2:1
1920x1080/60/2:1
1920x1080/30/1:1
1920x1080/50/2:1
1920x1080/25/1:1
1920x1080/24/1:1
1920x1080/24(sF)
1280x720/60/1:1
Number of samples
of active 1 line
1920
1920
1920
1920
1920
1920
1920
1280
Number of active
lines in 1 frame
1035
1080
1080
1080
1080
1080
1080
720
Frame rate (Hz)
30
30
30
25
25
24
24
60
Scanning format
2:1 interlaced
2:1 interlaced
Progressive
2:1 interlaced
Progressive
Progressive
Progressive(sF)
Progressive
Sampling
frequency (MHz)
74.25
74.25
74.25
74.25
74.25
74.25
74.25
74.25
Total number of
samples in 1 line (dot)
2200
2200
2200
2640
2640
2750
2750
1650
Total number of
lines in 1 frame
1125
1125
1125
1125
1125
1125
1125
750
Note that the BNC cable used with the HDSDI connector should be 5C-FB equivalent cable or better.
Packaged items: HDSDI board (1), shield case (1), connector cable (2), flat cable (1), set screw for shield case (2) and installation
manual (1)
SX HDSDI Board
This board accepts the input of non-compressed signal sources such as commercial type digital VCR (D5-VCR) compatible with digital serial
component signals (of the SMPTE 292M standard) and provides a high quality image without quantization noise. This board accepts the following
image formats.