Digital Projection
M-Vision Cine 320 3D Series
PROJECTOR OVERVIEW
Installation and Quick-Start Guide
6
Rev E July 2014
Error codes (red light)
If the projector detects an error, the red Issue indicator will flash as shown in the chart below.
For example, if the lamp door is left open, the red indicator will flash twice followed by a pause, then the sequence will repeat until the error
condition is corrected.
Condition
Issue indicator behaviour (red light)
Lamp fail
Flashes once, then pauses, then repeats.
Lamp door open
Flashes twice, then pauses, then repeats.
Fan fail
Flashes three times, then pauses, then repeats.
Over temperature
Flashes four times, then pauses, then repeats.
System error
On.
Notes
For full details of how to use the
controls and the menu system, see
the
Operating Guide
.
delay
delay
delay
delay
