Digital Projection
M-Vision Cine 320 3D Series
A TOUR OF THE MENUS
Operating Guide
39
Rev E July 2014
System menu
This menu contains the following settings:
•
OSD Settings
Controls the positioning and behavior of the OSD.
•
Blank Screen
Defines what appears on the screen while the projector is running with
no input signal.
•
Auto Power Off
Set this to
On
if you want the projector to go into STANDBY mode when
no input source is detected for 20 minutes.
•
Auto Power On
If this is
On
, the projector will start up as soon as the mains is connected.
If
Off
, the projector will go into STANDBY mode.
•
Projection Mode
Tabletop
is for a unit standing on its feet; set to
Ceiling
if the projector is
mounted upside down.
Front
and
Rear
define whether the projector is in
front of the screen or behind it.
•
Startup Splash
Show or hide the Digital Projection logo at startup.
•
Altitude
High
increases the fan speed to compensate for reduced air density at
high altitude.
Highlight the setting you wish to edit, and then either press
ENTER/SELECT
to access it, or use the
LEFT
and
RIGHT
arrow buttons to switch
between values.
Press
MENU
to go back.
Blank Screen
SYSTEM >>
OSD Settings
<Sub-menu>
Black
Auto Power Off
On
Auto Power On
Off
Projection Mode
Startup Splash
Altitude
Front Tabletop
On
Auto
Notes