Digital Projection
M-Vision Cine 320 3D Series
OPERATING THE PROJECTOR
Installation and Quick-Start Guide
11
Rev E July 2014
Adjusting the image
Orientation
To change the image orientation, access the
System
menu and then open the
Rear Projection
and
Ceiling Mode
settings.
Aspect ratio
To set up an aspect ratio for your image, do either of the following:
•
Press the
ASPECT RATIO
button
on the remote control to cycle through the available settings.
•
Access the
Main
menu and then select the
Aspect Ratio
setting.
Picture
To change brightness and contrast, do either of the following:
•
Press
BRIGHTNESS
or
CONTRAST
on the remote control, then use the arrow buttons to move the sliders.
•
Access the
Image
menu and adjust the
Brightness
and
Contrast
settings.
3D
In the
Main
menu, use the
3D Control
sub-menu.
Notes
For full details of how to use the
controls and the menu system, see
the
Operating Guide
.
