Digital Projection HIGlite 8000 Series, User Manual

Page: 18 / 84

Digital Projection
HIGHlite 8000 Series
OPERATING THE PROJECTOR Installation and Quick-Start Guide
12 Rev F July 2014
Adjusting the lens
Focus
1. Press the FOCUS button on the remote control. The blue transmit LED on the remote will light, indicating that the remote control is in
LENS FOCUS mode.
2. Within 10 seconds, press and hold the
UP
or
DOWN
arrow button to adjust the focus. Release the arrow button to stop the movement.
3. When the projector is in focus, press the
EXIT
button on the remote to exit LENS FOCUS mode.
Zoom
1. Press the ZOOM button on the remote control. The blue transmit LED on the remote will light, indicating that the remote control is in
LENS ZOOM mode.
2. Within 10 seconds, press and hold the UP or DOWN arrow button to adjust the zoom. Release the arrow button to stop the movement.
3. When the zoom has been set, press the
EXIT
button on the remote to exit LENS ZOOM mode.
Shift
1. Press the
SHIFT
button on the remote control. The blue transmit LED on the remote will light, indicating that the remote control is in
LENS SHIFT mode.
2. Within 10 seconds, press and hold the UP , DOWN , LEFT or RIGHT arrow button to adjust the image position. Release the arrow button
to stop the movement.
3. When the position has been set, press the
EXIT
button on the remote to exit LENS SHIFT mode.
Notes
When any of the three lens control
buttons is pressed, the projector will
enter LENS ADJUSTMENT mode
and the blue transmit indicator on
the remote control will light for 10
seconds:
When no adjustment has been
made for 10 seconds, the LED will
go out and the projector will exit
LENS ADJUSTMENT mode. Press
the lens control button again to
resume adjustment.
To end the adjustment before 10
seconds has elapsed, press the
EXIT
button.
All other adjustments will be locked
out until the lens adjustment is
ended.