Digital Projection HIGlite 8000 Series, User Manual

Page: 27 / 84

Digital Projection
HIGHlite 8000 Series
THE HIGHLITE PROJECTOR CONTROL UTILITY Operating Guide
21 Rev F July 2014
The HIGHlite Projector Control Utility
The HIGHlite Projector Control Utility provides an
intuitive interface to enable control of many of the
features of the projector from a personal computer, via a
LAN connection.
Because the projector is not equipped with an
on-screen display, most of the features are only
available from external control applications such as this.
When the Utility is started, the
Info page will display
immediately.
The page buttons are always visible at the side of the
display. Use the page buttons to navigate.
If the projector is able to connect to the computer, you
will see the screen shown here. (In the example, the
projector is ON.)
The PWR button
•
Click
PWR
to switch the projector into STANDBY
mode. The button will turn red.
•
Click
PWR
to switch the projector on. The button
will turn green.
Notes
To use the HIGHlite Projector
Control Utility,
the
Java Runtime
Environment software must be
installed on your computer. This
software can be downloaded free of
charge from www.java.com.
The LAN IP Address of the
projector can be found on the
Discover page of the Utility.
The Utility can be used to control
only one projector at a time, and
only one instance can be running at
one time.
More than one computer should
be used to control more than one
projector on the same network.
Some information, such as
temperature, is not available when
the projector is in STANDBY mode.