Page 4.6
Rev A October 2010
4. Controlling the projector
Digital Projection
HIGHlite 6000
User Manual
Notes
Using the control keys
Power
Press POWER ON
on the remote control to switch the projector ON.
The power indicator on the control panel will flash blue for approximately 3
0
seconds, whilst the lamp comes up to full brightness. When the projector is
ready for use, the power indicator will show a steady blue.
on the remote control to switch the projector to
STANDBY mode.
Press the button a second time to confirm your intention to switch to STANDBY
mode.
The lamp will switch off, and the power indicator on the control panel will flash
blue for approximately 30 seconds until the lamp has cooled down. Wait until
the power indicator has switched off and the standby indicator on the projector
control panel shows amber. The projector will now be in STANDBY mode.
Test pattern
Press the
key repeatedly to cycle through the
Test patterns
, in the
following order:
White, Black, Red, Green, Blue, Cyan, Magenta, Yellow, Chequerboard,
Greyscale, Alignment grid, White...
·
