Page 2.4
Rev A October 2010
2. Installation
Digital Projection
HIGHlite 6000
User Manual
Notes
Fitting and Removing a Lens
Remove the front cover by removing the 2 screws at either side of the front cover,
and sliding the front cover down to remove.
Insert the lens ensuring you push firmly fully into the projector then rotate the
lens clockwise until the lens locks onto the catch at the top of the lens mount.
To remove the lens, press and hold down the locking catch at the top of the lens
mount, rotate the lens slightly anticlockwise and then carefully remove the lens.
Refit the front cover after fitting or removing a lens as required.
